PROCMAILEX(5) PROCMAILEX(5)
NAME
procmailex - procmail rcfile examples
SYNOPSIS
$HOME/.procmailrc examples
DESCRIPTION
For a description of the rcfile format see procmailrc(5).
The weighted scoring technique is described in detail in the proc
mailsc(5) man page.
This man page shows several example recipes. For examples of complete
rcfiles you can check the NOTES section in procmail(1), or look at the
example rcfiles in /usr/share/doc/procmail/examples.
EXAMPLES
Sort out all mail coming from the scuba-dive mailing list into the
mailfolder scubafile (uses the locallockfile scubafile.lock).
:0:
* ^TOscuba
scubafile
Forward all mail from peter about compilers to william (and keep a copy
of it here in petcompil).
:0
* ^From.*peter
* ^Subject:.*compilers
{
:0 c
! william@somewhere.edu
:0
petcompil
}
An equivalent solution that accomplishes the same:
:0 c
* ^From.*peter
* ^Subject:.*compilers
! william@somewhere.edu
:0 A
petcompil
An equivalent, but slightly slower solution that accomplishes the same:
:0 c
* ^From.*peter
* ^Subject:.*compilers
! william@somewhere.edu
:0
* ^From.*peter
* ^Subject:.*compilers
petcompil
If you are fairly new to procmail and plan to experiment a little bit
it often helps to have a safety net of some sort. Inserting the
following two recipes above all other recipes will make sure that of
all arriving mail always the last 32 messages will be preserved. In
order for it to work as intended, you have to create a directory named
backup in $MAILDIR prior to inserting these two recipes.
:0 c
backup
:0 ic
| cd backup && rm -f dummy ls -t msg.* | sed -e 1,32d
If your system doesnt generate or generates incorrect leading From
lines on every mail, you can fix this by calling up procmail with the
-f- option. To fix the same problem by different means, you could have
inserted the following two recipes above all other recipes in your
rcfile. They will filter the header of any mail through formail which
will strip any leading From , and automatically regenerates it subse
quently.
:0 fhw
| formail -I "From " -a "From "
Add the headers of all messages that didnt come from the postmaster to
your private header collection (for statistics or mail debugging); and
use the lockfile headc.lock. In order to make sure the lockfile is
not removed until the pipe has finished, you have to specify option
w; otherwise the lockfile would be removed as soon as the pipe has
accepted the mail.
:0 hwc:
* !^FROM_MAILER
| uncompress headc.Z; cat >>headc; compress headc
Or, if you would use the more efficient gzip instead of compress:
:0 hwc:
* !^FROM_MAILER
| gzip >>headc.gz
Forward all mails shorter than 1000 bytes to my home address (no lock
file needed on this recipe).
:0
* < 1000
! myname@home
Split up incoming digests from the surfing mailing list into their
individual messages, and store them into surfing, using surfing.lock as
the locallockfile.
:0:
* ^Subject:.*surfing.*Digest
| formail +1 -ds >>surfing
Store everything coming from the postmaster or mailer-daemon (like
bounced mail) into the file postm, using postm.lock as the locallock
file.
:0:
* ^FROM_MAILER
postm
A simple autoreply recipe. It makes sure that neither mail from any
daemon (like bouncing mail or mail from mailing-lists), nor autoreplies
coming from yourself will be autoreplied to. If this precaution would
not be taken, disaster could result (ringing mail). In order for
this recipe to autoreply to all the incoming mail, you should of course
insert it before all other recipes in your rcfile. However, it is
advisable to put it after any recipes that process the mails from sub
scribed mailinglists; it generally is not a good idea to generate
autoreplies to mailinglists (yes, the !^FROM_DAEMON regexp should
already catch those, but if the mailinglist doesnt follow accepted
conventions, this might not be enough).
:0 h c
* !^FROM_DAEMON
* !^X-Loop: your@own.mail.address
| (formail -r -I"Precedence: junk" \
-A"X-Loop: your@own.mail.address" ; \
echo "Mail received.") | $SENDMAIL -t
A more complicated autoreply recipe that implements the functional
equivalent of the well known vacation(1) program. This recipe is based
on the same principles as the last one (prevent ringing mail). In
addition to that however, it maintains a vacation database by extract
ing the name of the sender and inserting it in the vacation.cache file
if the name was new (the vacation.cache file is maintained by formail
which will make sure that it always contains the most recent names, the
size of the file is limited to a maximum of approximately 8192 bytes).
If the name was new, an autoreply will be sent.
As you can see, the following recipe has comments between the condi
tions. This is allowed. Do not put comments on the same line as a
condition though.
SHELL=/bin/sh # for other shells, this might need adjustment
:0 Whc: vacation.lock
# Perform a quick check to see if the mail was addressed to us
* $^To:.*\<$\LOGNAME\>
# Dont reply to daemons and mailinglists
* !^FROM_DAEMON
# Mail loops are evil
* !^X-Loop: your@own.mail.address
| formail -rD 8192 vacation.cache
:0 ehc # if the name was not in the cache
| (formail -rI"Precedence: junk" \
-A"X-Loop: your@own.mail.address" ; \
echo "I received your mail,"; \
echo "but I wont be back until Monday."; \
echo "-- "; cat $HOME/.signature \
) | $SENDMAIL -oi -t
Store all messages concerning TeX in separate, unique filenames, in a
directory named texmail (this directory has to exist); there is no need
to use lockfiles in this case, so we wont.
:0
* (^TO|^Subject:.*)TeX[^t]
texmail
The same as above, except now we store the mails in numbered files (MH
mail folder).
:0
* (^TO|^Subject:.*)TeX[^t]
texmail/.
Or you could file the mail in several directory folders at the same
time. The following recipe will deliver the mail to two MH-folders and
one directory folder. It is actually only one file with two extra
hardlinks.
:0
* (^TO|^Subject:.*)TeX[^t]
texmail/. wordprocessing dtp/.
Store all the messages about meetings in a folder that is in a direc
tory that changes every month. E.g. if it were January 1994, the
folder would have the name 94-01/meeting and the locallockfile would
be 94-01/meeting.lock.
:0:
* meeting
date +%y-%m/meeting
The same as above, but, if the 94-01 directory wouldnt have existed,
it is created automatically:
MONTHFOLDER=date +%y-%m
:0 Wic
* ? test ! -d $MONTHFOLDER
| mkdir $MONTHFOLDER
:0:
* meeting
${MONTHFOLDER}/meeting
The same as above, but now by slightly different means:
MONTHFOLDER=date +%y-%m
DUMMY=test -d $MONTHFOLDER || mkdir $MONTHFOLDER
:0:
* meeting
${MONTHFOLDER}/meeting
If you are subscribed to several mailinglists and people cross-post to
some of them, you usually receive several duplicate mails (one from
every list). The following simple recipe eliminates duplicate mails.
It tells formail to keep an 8KB cache file in which it will store the
Message-IDs of the most recent mails you received. Since Message-IDs
are guaranteed to be unique for every new mail, they are ideally suited
to weed out duplicate mails. Simply put the following recipe at the
top of your rcfile, and no duplicate mail will get past it.
:0 Wh: msgid.lock
| formail -D 8192 msgid.cache
Beware if you have delivery problems in recipes below this one and
procmail tries to requeue the mail, then on the next queue run, this
mail will be considered a duplicate and will be thrown away. For those
not quite so confident in their own scripting capabilities, you can use
the following recipe instead. It puts duplicates in a separate folder
instead of throwing them away. It is up to you to periodically empty
the folder of course.
:0 Whc: msgid.lock
| formail -D 8192 msgid.cache
:0 a:
duplicates
Procmail can deliver to MH folders directly, but, it does not update
the unseen sequences the real MH manages. If you want procmail to
update those as well, use a recipe like the following which will file
everything that contains the word spam in the body of the mail into an
MH folder called spamfold. Note the local lockfile, which is needed
because MH programs do not lock the sequences file. Asynchronous invo
cations of MH programs that change the sequences file may therefore
corrupt it or silently lose changes. Unfortunately, the lockfile
doesnt completely solve the problem as rcvstore could be invoked while
show or mark or some other MH program is running. This problem is
expected to be fixed in some future version of MH, but until then,
youll have to balance the risk of lost or corrupt sequences against
the benefits of the unseen sequence.
:0 :spamfold/$LOCKEXT
* B ?? spam
| rcvstore +spamfold
When delivering to emacs folders (i.e., mailfolders managed by any
emacs mail package, e.g., RMAIL or VM) directly, you should use emacs-
compatible lockfiles. The emacs mailers are a bit braindamaged in that
respect, they get very upset if someone delivers to mailfolders which
they already have in their internal buffers. The following recipe
assumes that $HOME equals /home/john.
MAILDIR=Mail
:0:/usr/local/lib/emacs/lock/!home!john!Mail!mailbox
* ^Subject:.*whatever
mailbox
Alternatively, you can have procmail deliver into its own set of mail
boxes, which you then periodically empty and copy over to your emacs
files using movemail. Movemail uses mailbox.lock local lockfiles per
mailbox. This actually is the preferred mode of operation in conjunc
tion with procmail.
To extract certain headers from a mail and put them into environment
variables you can use any of the following constructs:
SUBJECT=formail -xSubject: # regular field
FROM=formail -rt -xTo: # special case
:0 h # alternate method
KEYWORDS=| formail -xKeywords:
If you are using temporary files in a procmailrc file, and want to make
sure that they are removed just before procmail exits, you could use
something along the lines of:
TEMPORARY=$HOME/tmp/pmail.$$
TRAP="/bin/rm -f $TEMPORARY"
The TRAP keyword can also be used to change the exitcode of procmail.
I.e. if you want procmail to return an exitcode of 1 instead of its
regular exitcodes, you could use:
EXITCODE=""
TRAP="exit 1;" # The trailing semi-colon is important
# since exit is not a standalone program
Or, if the exitcode does not need to depend on the programs run from
the TRAP, you can use a mere:
EXITCODE=1
The following recipe prints every incoming mail that looks like a
postscript file.
:0 Bb
* ^^%!
| lpr
The following recipe does the same, but is a bit more selective. It
only prints the postscript file if it comes from the print-server. The
first condition matches only if it is found in the header. The second
condition only matches at the start of the body.
:0 b
* ^From[ :].*print-server
* B ?? ^^%!
| lpr
The same as above, but now by slightly different means:
:0
* ^From[ :].*print-server
{
:0 B b
* ^^%!
| lpr
}
Likewise:
:0 HB b
* ^^(.+$)*From[ :].*print-server
* ^^(.+$)*^%!
| lpr
Suppose you have two accounts, you use both accounts regularly, but
they are in very distinct places (i.e., you can only read mail that
arrived at either one of the accounts). You would like to forward mail
arriving at account one to account two, and the other way around. The
first thing that comes to mind is using .forward files at both sites;
this wont work of course, since you will be creating a mail loop.
This mail loop can be avoided by inserting the following recipe in
front of all other recipes in the $HOME/.procmailrc files on both
sites. If you make sure that you add the same X-Loop: field at both
sites, mail can now safely be forwarded to the other account from
either of them.
:0 c
* !^X-Loop: yourname@your.main.mail.address
| formail -A "X-Loop: yourname@your.main.mail.address" | \
$SENDMAIL -oi yourname@the.other.account
If someone sends you a mail with the word retrieve in the subject,
the following will automatically send back the contents of info_file to
the sender. Like in all recipes where we send mail, we watch out for
mail loops.
:0
* !^From +YOUR_USERNAME
* !^Subject:.*Re:
* !^FROM_DAEMON
* ^Subject:.*retrieve
| (formail -r ; cat info_file) | $SENDMAIL -oi -t
Now follows an example for a very simple fileserver accessible by mail.
For more demanding applications, I suggest you take a look at SmartList
(available from the same place as the procmail distribution). As
listed, this fileserver sends back at most one file per request, it
ignores the body of incoming mails, the Subject: line has to look like
"Subject: send file the_file_you_want" (the blanks are significant), it
does not return files that have names starting with a dot, nor does it
allow files to be retrieved that are outside the fileserver directory
tree (if you decide to munge this example, make sure you do not inad
vertently loosen this last restriction).
:0
* ^Subject: send file [0-9a-z]
* !^X-Loop: yourname@your.main.mail.address
* !^Subject:.*Re:
* !^FROM_DAEMON
* !^Subject: send file .*[/.]\.
{
MAILDIR=$HOME/fileserver # chdir to the fileserver directory
:0 fhw # reverse mailheader and extract name
* ^Subject: send file \/[^ ]*
| formail -rA "X-Loop: yourname@your.main.mail.address"
FILE="$MATCH" # the requested filename
:0 ah
| cat - ./$FILE 2>&1 | $SENDMAIL -oi -t
}
The following example preconverts all plain-text mail arriving in cer
tain encoded MIME formats into a more compact 8-bit format which can be
used and displayed more easily by most programs. The mimencode(1) pro
gram is part of Nathaniel Borensteins metamail package.
:0
* ^Content-Type: *text/plain
{
:0 fbw
* ^Content-Transfer-Encoding: *quoted-printable
| mimencode -u -q
:0 Afhw
| formail -I "Content-Transfer-Encoding: 8bit"
:0 fbw
* ^Content-Transfer-Encoding: *base64
| mimencode -u -b
:0 Afhw
| formail -I "Content-Transfer-Encoding: 8bit"
}
The following one is rather exotic, but it only serves to demonstrate a
feature. Suppose you have a file in your HOME directory called
".urgent", and the (one) person named in that file is the sender of an
incoming mail, youd like that mail to be stored in $MAILDIR/urgent
instead of in any of the normal mailfolders it would have been sorted
in. Then this is what you could do (beware, the filelength of
$HOME/.urgent should be well below $LINEBUF, increase LINEBUF if neces
sary):
URGMATCH=cat $HOME/.urgent
:0:
* $^From.*${URGMATCH}
urgent
An entirely different application for procmail would be to condition
ally apply filters to a certain (outgoing) text or mail. A typical
example would be a filter through which you pipe all outgoing mail, in
order to make sure that it will be MIME encoded only if it needs to be.
I.e. in this case you could start procmail in the middle of a pipe
like:
cat newtext | procmail ./mimeconvert | mail chris@where.ever
The mimeconvert rcfile could contain something like (the =0x80= and
=0xff= should be substituted with the real 8-bit characters):
DEFAULT=| # pipe to stdout instead of
# delivering mail as usual
:0 Bfbw
* [=0x80=-=0xff=]
| mimencode -q
:0 Afhw
| formail -I MIME-Version: 1.0 \
-I Content-Type: text/plain; charset=ISO-8859-1 \
-I Content-Transfer-Encoding: quoted-printable
SEE ALSO
procmail(1), procmailrc(5), procmailsc(5), sh(1), csh(1), mail(1),
mailx(1), uucp(1), aliases(5), sendmail(8), egrep(1), grep(1), biff(1),
comsat(8), mimencode(1), lockfile(1), formail(1)
AUTHORS
Stephen R. van den Berg
Philip A. Guenther
BuGless 2001/08/04 PROCMAILEX(5)
|
