Quick ?s
Cheat Sheets
Man Pages
The Lynx
TTY_IOCTL(4)		   Linux Programmers Manual		 TTY_IOCTL(4)

       tty ioctl - ioctls for terminals and serial lines


       int ioctl(int fd, int cmd, ...);

       The  ioctl()  call for terminals and serial ports accepts many possible
       command arguments.  Most require a third  argument,  of	varying  type,
       here called argp or arg.

       Use  of ioctl makes for non-portable programs.  Use the POSIX interface
       described in termios(3) whenever possible.

   Get and Set Terminal Attributes
       TCGETS	 struct termios *argp
	      Equivalent to tcgetattr(fd, argp).
	      Get the current serial port settings.

       TCSETS	 const struct termios *argp
	      Equivalent to tcsetattr(fd, TCSANOW, argp).
	      Set the current serial port settings.

       TCSETSW	 const struct termios *argp
	      Equivalent to tcsetattr(fd, TCSADRAIN, argp).
	      Allow the output buffer to drain, and  set  the  current	serial
	      port settings.

       TCSETSF	 const struct termios *argp
	      Equivalent to tcsetattr(fd, TCSAFLUSH, argp).
	      Allow the output buffer to drain, discard pending input, and set
	      the current serial port settings.

       The following four  ioctls  are	just  like  TCGETS,  TCSETS,  TCSETSW,
       TCSETSF,  except  that  they take a struct termio * instead of a struct
       termios *.

       TCGETA	 struct termio *argp

       TCSETA	 const struct termio *argp

       TCSETAW	 const struct termio *argp

       TCSETAF	 const struct termio *argp

   Locking the termios structure
       The termios structure of a tty can be locked.  The  lock  is  itself  a
       termios	structure,  with  non-zero  bits or fields indicating a locked

       TIOCGLCKTRMIOS struct termios *argp
	      Gets the locking status of the termios structure of  the	termi

       TIOCSLCKTRMIOS const struct termios *argp
	      Sets  the  locking status of the termios structure of the termi
	      nal.  Only root can do this.

   Get and Set Window Size
       Window sizes are kept in the kernel, but not used by the kernel (except
       in  the	case  of  virtual  consoles,  where the kernel will update the
       window size when the size of the virtual console changes, for  example,
       by loading a new font).

       The following constants and structure are defined in .

       TIOCGWINSZ     struct winsize *argp
	      Get window size.

       TIOCSWINSZ     const struct winsize *argp
	      Set window size.

       The struct used by these ioctls is defined as

	   struct winsize {
	       unsigned short ws_row;
	       unsigned short ws_col;
	       unsigned short ws_xpixel;   /* unused */
	       unsigned short ws_ypixel;   /* unused */

       When  the  window  size changes, a SIGWINCH signal is sent to the fore
       ground process group.

   Sending a Break
       TCSBRK	 int arg
	      Equivalent to tcsendbreak(fd, arg).
	      If the terminal is using asynchronous serial data  transmission,
	      and  arg	is zero, then send a break (a stream of zero bits) for
	      between 0.25 and 0.5 seconds.  If  the  terminal	is  not  using
	      asynchronous  serial  data  transmission, then either a break is
	      sent, or the function returns without doing anything.  When  arg
	      is non-zero, nobody knows what will happen.

	      (SVr4,  UnixWare,  Solaris, Linux treat tcsendbreak(fd,arg) with
	      non-zero arg like tcdrain(fd).  SunOS treats  arg  as  a	multi
	      plier,  and sends a stream of bits arg times as long as done for
	      zero arg.  DG/UX and AIX treat arg (when non-zero) as a  timein
	      terval measured in milliseconds.	HP-UX ignores arg.)

       TCSBRKP	 int arg
	      So-called  "POSIX version" of TCSBRK.  It treats non-zero arg as
	      a timeinterval measured in deciseconds, and  does  nothing  when
	      the driver does not support breaks.

       TIOCSBRK  void
	      Turn break on, that is, start sending zero bits.

       TIOCCBRK  void
	      Turn break off, that is, stop sending zero bits.

   Software flow control
       TCXONC	 int arg
	      Equivalent to tcflow(fd, arg).
	      See  tcflow(3)  for  the	argument values TCOOFF, TCOON, TCIOFF,

   Buffer count and flushing
       FIONREAD  int *argp
	      Get the number of bytes in the input buffer.

       TIOCINQ	 int *argp
	      Same as FIONREAD.

       TIOCOUTQ  int *argp
	      Get the number of bytes in the output buffer.

       TCFLSH	 int arg
	      Equivalent to tcflush(fd, arg).
	      See tcflush(3)  for  the	argument  values  TCIFLUSH,  TCOFLUSH,

   Faking input
       TIOCSTI	 const char *argp
	      Insert the given byte in the input queue.

   Redirecting console output
       TIOCCONS  void
	      Redirect	 output  that  would  have  gone  to  /dev/console  or
	      /dev/tty0 to the given tty.  If that was a pty master,  send  it
	      to the slave.  Anybody can do this as long as the output was not
	      redirected yet.  If it was redirected already EBUSY is returned,
	      but root may stop redirection by using this ioctl with fd point
	      ing at /dev/console or /dev/tty0.

   Controlling tty
       TIOCSCTTY int arg
	      Make the given tty the controlling tty of the  calling  process.
	      The calling process must be a session leader and not have a con
	      trolling tty already.  If this tty is  already  the  controlling
	      tty  of  a  different  session  group  then the ioctl fails with
	      EPERM, unless the caller is root and arg equals 1, in which case
	      the  tty is stolen, and all processes that had it as controlling
	      tty lose it.

       TIOCNOTTY void
	      If the given tty was the controlling tty of the calling process,
	      give  up	this  controlling  tty.   If  the  process was session
	      leader, then send SIGHUP and SIGCONT to the  foreground  process
	      group  and  all processes in the current session lose their con
	      trolling tty.

   Process group and session ID
       TIOCGPGRP pid_t *argp
	      When successful, equivalent to *argp = tcgetpgrp(fd).
	      Get the process group ID of the foreground process group on this

       TIOCSPGRP const pid_t *argp
	      Equivalent to tcsetpgrp(fd, *argp).
	      Set the foreground process group ID of this tty.

       TIOCGSID  pid_t *argp
	      Get the session ID of the given tty.  This will fail with ENOTTY
	      in case the tty is not a master pty and not our controlling tty.

   Exclusive mode
       TIOCEXCL  void
	      Put  the tty into exclusive mode.  No further open(2) operations
	      on the terminal are permitted.   (They  will  fail  with	EBUSY,
	      except for root.)

       TIOCNXCL  void
	      Disable exclusive mode.

   Line discipline
       TIOCGETD  int *argp
	      Get the line discipline of the tty.

       TIOCSETD  const int *argp
	      Set the line discipline of the tty.

   Pseudo-tty ioctls
       TIOCPKT	 const int *argp
	      Enable  (when *argp is non-zero) or disable packet mode.	Can be
	      applied to the master side of a pseudo-terminal only  (and  will
	      return  ENOTTY  otherwise).   In	packet	mode,  each subsequent
	      read(2) will return a packet that either contains a single  non-
	      zero  control  byte,  or has a single byte containing zero (' ')
	      followed by data written on the slave side of the pty.   If  the
	      first  byte  is not TIOCPKT_DATA (0), it is an OR of one or more
	      of the following bits:

	      TIOCPKT_FLUSHREAD   The read queue for the terminal is flushed.
	      TIOCPKT_FLUSHWRITE  The write queue for the terminal is flushed.
	      TIOCPKT_STOP	  Output to the terminal is stopped.
	      TIOCPKT_START	  Output to the terminal is restarted.
	      TIOCPKT_DOSTOP	  The start and stop characters are ^S/^Q.
	      TIOCPKT_NOSTOP	  The start and stop characters are not ^S/^Q.

	      While this mode is in use, the presence of control status infor
	      mation  to  be  read  from  the master side may be detected by a
	      select(2) for exceptional conditions.

	      This mode is used by rlogin(1) and  rlogind(8)  to  implement  a
	      remote-echoed, locally ^S/^Q flow-controlled remote login.

	      not been implemented under Linux.

   Modem control
       TIOCMGET  int *argp
	      get the status of modem bits.

       TIOCMSET  const int *argp
	      set the status of modem bits.

       TIOCMBIC  const int *argp
	      clear the indicated modem bits.

       TIOCMBIS  const int *argp
	      set the indicated modem bits.

       Bits used by these four ioctls:

       TIOCM_LE        DSR (data set ready/line enable)
       TIOCM_DTR       DTR (data terminal ready)
       TIOCM_RTS       RTS (request to send)
       TIOCM_ST        Secondary TXD (transmit)
       TIOCM_SR        Secondary RXD (receive)
       TIOCM_CTS       CTS (clear to send)
       TIOCM_CAR       DCD (data carrier detect)
       TIOCM_CD 	see TIOCM_CAR
       TIOCM_RNG       RNG (ring)
       TIOCM_RI 	see TIOCM_RNG
       TIOCM_DSR       DSR (data set ready)

   Marking a line as local
       TIOCGSOFTCAR   int *argp
	      ("Get software carrier flag") Get the status of the CLOCAL  flag
	      in the c_cflag field of the termios structure.

       TIOCSSOFTCAR   const int *argp
	      ("Set software carrier flag") Set the CLOCAL flag in the termios
	      structure when *argp is non-zero, and clear it otherwise.

       If the CLOCAL flag for a line is off, the hardware carrier detect (DCD)
       signal  is  significant,  and  an open(2) of the corresponding tty will
       block until DCD is asserted, unless the O_NONBLOCK flag is  given.   If
       CLOCAL  is  set,  the  line  behaves as if DCD is always asserted.  The
       software carrier flag is usually turned on for local  devices,  and  is
       off for lines with modems.

       For the TIOCLINUX ioctl, see console_ioctl(4).

   Kernel debugging

       TIOCTTYGSTRUCT struct tty_struct *argp
	      Get the tty_struct corresponding to fd.

       The  ioctl()  system call returns 0 on success.	On error it returns -1
       and sets errno appropriately.

       EINVAL Invalid command parameter.

	      Unknown command.

       ENOTTY Inappropriate fd.

       EPERM  Insufficient permission.

       Check the condition of DTR on the serial port.


	   int fd, serial;

	   fd = open("/dev/ttyS0", O_RDONLY);
	   ioctl(fd, TIOCMGET, &serial);
	   if (serial & TIOCM_DTR)
	       puts("TIOCM_DTR is not set");
	       puts("TIOCM_DTR is set");

       ioctl(2), termios(3), console_ioctl(4), pty(7)

       This page is part of release 3.05 of the Linux  man-pages  project.   A
       description  of	the project, and information about reporting bugs, can
       be found at http://www.kernel.org/doc/man-pages/.

Linux				  2008-07-15			  TTY_IOCTL(4)

Yals.net is © 1999-2009 Crescendo Communications
Sharing tech info on the web for more than a decade!
This page was generated Thu Apr 30 17:05:30 2009