GETOPT(1) GETOPT(1)
NAME
getopt - parse command options (enhanced)
SYNOPSIS
getopt optstring parameters
getopt [options] [--] optstring parameters
getopt [options] -o|--options optstring [options] [--] parameters
DESCRIPTION
getopt is used to break up (parse) options in command lines for easy
parsing by shell procedures, and to check for legal options. It uses
the GNU getopt(3) routines to do this.
The parameters getopt is called with can be divided into two parts:
options which modify the way getopt will parse (options and
-o|--options optstring in the SYNOPSIS), and the parameters which are
to be parsed (parameters in the SYNOPSIS). The second part will start
at the first non-option parameter that is not an option argument, or
after the first occurrence of --. If no -o or --options option
is found in the first part, the first parameter of the second part is
used as the short options string.
If the environment variable GETOPT_COMPATIBLE is set, or if its first
parameter is not an option (does not start with a -, this is the
first format in the SYNOPSIS), getopt will generate output that is com
patible with that of other versions of getopt(1). It will still do
parameter shuffling and recognize optional arguments (see section COM
PATIBILITY for more information).
Traditional implementations of getopt(1) are unable to cope with
whitespace and other (shell-specific) special characters in arguments
and non-option parameters. To solve this problem, this implementation
can generate quoted output which must once again be interpreted by the
shell (usually by using the eval command). This has the effect of pre
serving those characters, but you must call getopt in a way that is no
longer compatible with other versions (the second or third format in
the SYNOPSIS). To determine whether this enhanced version of getopt(1)
is installed, a special test option (-T) can be used.
OPTIONS
-a, --alternative
Allow long options to start with a single -.
-h, --help
Output a small usage guide and exit succesfully. No other output
is generated.
-l, --longoptions longopts
The long (multi-character) options to be recognized. More than
one option name may be specified at once, by separating the
names with commas. This option may be given more than once, the
longopts are cumulative. Each long option name in longopts may
be followed by one colon to indicate it has a required argu
ment,and by two colons to indicate it has an optional argument.
-n, --name progname
The name that will be used by the getopt(3) routines when it
reports errors. Note that errors of getopt(1) are still reported
as coming from getopt.
-o, --options shortopts
The short (one-character) options to be recognized. If this
option is not found, the first parameter of getopt that does not
start with a - (and is not an option argument) is used as the
short options string. Each short option character in shortopts
may be followed by one colon to indicate it has a required argu
ment, and by two colons to indicate it has an optional argument.
The first character of shortopts may be + or - to influence
the way options are parsed and output is generated (see section
SCANNING MODES for details).
-q, --quiet
Disable error reporting by getopt(3).
-Q, --quiet-output
Do not generate normal output. Errors are still reported by
getopt(3), unless you also use -q.
-s, --shell shell
Set quoting conventions to those of shell. If no -s argument is
found, the BASH conventions are used. Valid arguments are cur
rently sh bash, csh, and tcsh.
-u, --unquoted
Do not quote the output. Note that whitespace and special
(shell-dependent) characters can cause havoc in this mode (like
they do with other getopt(1) implementations).
-T --test
Test if your getopt(1) is this enhanced version or an old ver
sion. This generates no output, and sets the error status to 4.
Other implementations of getopt(1), and this version if the
environment variable GETOPT_COMPATIBLE is set, will return --
and error status 0.
-V, --version
Output version information and exit succesfully. No other output
is generated.
PARSING
This section specifies the format of the second part of the parameters
of getopt (the parameters in the SYNOPSIS). The next section (OUTPUT)
describes the output that is generated. These parameters were typically
the parameters a shell function was called with. Care must be taken
that each parameter the shell function was called with corresponds to
exactly one parameter in the parameter list of getopt (see the EXAM
PLES). All parsing is done by the GNU getopt(3) routines.
The parameters are parsed from left to right. Each parameter is classi
fied as a short option, a long option, an argument to an option, or a
non-option parameter.
A simple short option is a - followed by a short option character. If
the option has a required argument, it may be written directly after
the option character or as the next parameter (ie. separated by whites
pace on the command line). If the option has an optional argument, it
must be written directly after the option character if present.
It is possible to specify several short options after one -, as long
as all (except possibly the last) do not have required or optional
arguments.
A long option normally begins with -- followed by the long option
name. If the option has a required argument, it may be written
directly after the long option name, separated by =, or as the next
argument (ie. separated by whitespace on the command line). If the
option has an optional argument, it must be written directly after the
long option name, separated by =, if present (if you add the = but
nothing behind it, it is interpreted as if no argument was present;
this is a slight bug, see the BUGS). Long options may be abbreviated,
as long as the abbreviation is not ambiguous.
Each parameter not starting with a -, and not a required argument of
a previous option, is a non-option parameter. Each parameter after a
-- parameter is always interpreted as a non-option parameter. If the
environment variable POSIXLY_CORRECT is set, or if the short option
string started with a +, all remaining parameters are interpreted as
non-option parameters as soon as the first non-option parameter is
found.
OUTPUT
Output is generated for each element described in the previous section.
Output is done in the same order as the elements are specified in the
input, except for non-option parameters. Output can be done in compati
ble (unquoted) mode, or in such way that whitespace and other special
characters within arguments and non-option parameters are preserved
(see QUOTING). When the output is processed in the shell script, it
will seem to be composed of distinct elements that can be processed one
by one (by using the shift command in most shell languages). This is
imperfect in unquoted mode, as elements can be split at unexpected
places if they contain whitespace or special characters.
If there are problems parsing the parameters, for example because a
required argument is not found or an option is not recognized, an error
will be reported on stderr, there will be no output for the offending
element, and a non-zero error status is returned.
For a short option, a single - and the option character are generated
as one parameter. If the option has an argument, the next parameter
will be the argument. If the option takes an optional argument, but
none was found, the next parameter will be generated but be empty in
quoting mode, but no second parameter will be generated in unquoted
(compatible) mode. Note that many other getopt(1) implemetations do
not support optional arguments.
If several short options were specified after a single -, each will
be present in the output as a separate parameter.
For a long option, -- and the full option name are generated as one
parameter. This is done regardless whether the option was abbreviated
or specified with a single - in the input. Arguments are handled as
with short options.
Normally, no non-option parameters output is generated until all
options and their arguments have been generated. Then -- is generated
as a single parameter, and after it the non-option parameters in the
order they were found, each as a separate parameter. Only if the first
character of the short options string was a -, non-option parameter
output is generated at the place they are found in the input (this is
not supported if the first format of the SYNOPSIS is used; in that case
all preceding occurrences of - and + are ignored).
QUOTING
In compatible mode, whitespace or special characters in arguments or
non-option parameters are not handled correctly. As the output is fed
to the shell script, the script does not know how it is supposed to
break the output into separate parameters. To circumvent this problem,
this implementation offers quoting. The idea is that output is gener
ated with quotes around each parameter. When this output is once again
fed to the shell (usually by a shell eval command), it is split cor
rectly into separate parameters.
Quoting is not enabled if the environment variable GETOPT_COMPATIBLE is
set, if the first form of the SYNOPSIS is used, or if the option -u
is found.
Different shells use different quoting conventions. You can use the
-s option to select the shell you are using. The following shells are
currently supported: sh, bash, csh and tcsh. Actually, only
two flavors are distinguished: sh-like quoting conventions and
csh-like quoting conventions. Chances are that if you use another shell
script language, one of these flavors can still be used.
SCANNING MODES
The first character of the short options string may be a - or a +
to indicate a special scanning mode. If the first calling form in the
SYNOPSIS is used they are ignored; the environment variable
POSIXLY_CORRECT is still examined, though.
If the first character is +, or if the environment variable
POSIXLY_CORRECT is set, parsing stops as soon as the first non-option
parameter (ie. a parameter that does not start with a -) is found
that is not an option argument. The remaining parameters are all inter
preted as non-option parameters.
If the first character is a -, non-option parameters are outputed at
the place where they are found; in normal operation, they are all col
lected at the end of output after a -- parameter has been generated.
Note that this -- parameter is still generated, but it will always be
the last parameter in this mode.
COMPATIBILITY
This version of getopt(1) is written to be as compatible as possible to
other versions. Usually you can just replace them with this version
without any modifications, and with some advantages.
If the first character of the first parameter of getopt is not a -,
getopt goes into compatibility mode. It will interpret its first param
eter as the string of short options, and all other arguments will be
parsed. It will still do parameter shuffling (ie. all non-option param
eters are outputed at the end), unless the environment variable
POSIXLY_CORRECT is set.
The environment variable GETOPT_COMPATIBLE forces getopt into compati
bility mode. Setting both this environment variable and POSIXLY_CORRECT
offers 100% compatibility for difficult programs. Usually, though,
neither is needed.
In compatibility mode, leading - and + characters in the short
options string are ignored.
RETURN CODES
getopt returns error code 0 for succesful parsing, 1 if getopt(3)
returns errors, 2 if it does not understand its own parameters, 3 if an
internal error occurs like out-of-memory, and 4 if it is called with
-T.
EXAMPLES
Example scripts for (ba)sh and (t)csh are provided with the getopt(1)
distribution, and are optionally installed in /usr/lib/getopt or
/usr/local/lib/getopt (if you have created it).
ENVIRONMENT
POSIXLY_CORRECT
This environment variable is examined by the getopt(3) routines.
If it is set, parsing stops as soon as a parameter is found that
is not an option or an option argument. All remaining parameters
are also interpreted as non-option parameters, regardless
whether they start with a -.
GETOPT_COMPATIBLE
Forces getopt to use the first calling format as specified in
the SYNOPSIS.
BUGS
getopt(3) can parse long options with optional arguments that are given
an empty optional argument (but can not do this for short options).
This getopt(1) treats optional arguments that are empty as if they were
not present.
The syntax if you do not want any short option variables at all is not
very intuitive (you have to set them explicitely to the empty string).
AUTHOR
Frodo Looijaard
SEE ALSO
getopt(3), bash(1), tcsh(1).
Linux May 31, 1997 GETOPT(1)
|
