FENV(3) Linux Programmers Manual FENV(3)
feclearexcept, fegetexceptflag, feraiseexcept, fesetexceptflag, fetes
texcept, fegetenv, fegetround, feholdexcept, fesetround, fesetenv,
feupdateenv, feenableexcept, fedisableexcept, fegetexcept - floating-
point rounding and exception handling
int feclearexcept(int excepts);
int fegetexceptflag(fexcept_t *flagp, int excepts);
int feraiseexcept(int excepts);
int fesetexceptflag(const fexcept_t *flagp, int excepts);
int fetestexcept(int excepts);
int fesetround(int rounding_mode);
int fegetenv(fenv_t *envp);
int feholdexcept(fenv_t *envp);
int fesetenv(const fenv_t *envp);
int feupdateenv(const fenv_t *envp);
Link with -lm.
These eleven functions were defined in C99, and describe the handling
of floating-point rounding and exceptions (overflow, zero-divide etc.).
The DivideByZero exception occurs when an operation on finite numbers
produces infinity as exact answer.
The Overflow exception occurs when a result has to be represented as a
floating-point number, but has (much) larger absolute value than the
largest (finite) floating-point number that is representable.
The Underflow exception occurs when a result has to be represented as a
floating-point number, but has smaller absolute value than the smallest
positive normalized floating-point number (and would lose much accuracy
when represented as a denormalized number).
The Inexact exception occurs when the rounded result of an operation is
not equal to the infinite precision result. It may occur whenever
Overflow or Underflow occurs.
The Invalid exception occurs when there is no well-defined result for
an operation, as for 0/0 or infinity - infinity or sqrt(-1).
Exceptions are represented in two ways: as a single bit (exception
present/absent), and these bits correspond in some implementation-
defined way with bit positions in an integer, and also as an opaque
structure that may contain more information about the exception (per
haps the code address where it occurred).
Each of the macros FE_DIVBYZERO, FE_INEXACT, FE_INVALID, FE_OVERFLOW,
FE_UNDERFLOW is defined when the implementation supports handling of
the corresponding exception, and if so then defines the corresponding
bit(s), so that one can call exception handling functions, for example,
using the integer argument FE_OVERFLOW|FE_UNDERFLOW. Other exceptions
may be supported. The macro FE_ALL_EXCEPT is the bitwise OR of all
bits corresponding to supported exceptions.
The feclearexcept() function clears the supported exceptions repre
sented by the bits in its argument.
The fegetexceptflag() function stores a representation of the state of
the exception flags represented by the argument excepts in the opaque
The feraiseexcept() function raises the supported exceptions repre
sented by the bits in excepts.
The fesetexceptflag() function sets the complete status for the excep
tions represented by excepts to the value *flagp. This value must have
been obtained by an earlier call of fegetexceptflag() with a last argu
ment that contained all bits in excepts.
The fetestexcept() function returns a word in which the bits are set
that were set in the argument excepts and for which the corresponding
exception is currently set.
Each of the macros FE_DOWNWARD, FE_TONEAREST, FE_TOWARDZERO, FE_UPWARD
is defined when the implementation supports getting and setting the
corresponding rounding direction.
The fegetround() function returns the macro corresponding to the cur
rent rounding mode.
The fesetround() function sets the rounding mode as specified by its
argument and returns zero when it was successful.
Floating point environment
The entire floating-point environment, including control modes and sta
tus flags, can be handled as one opaque object, of type fenv_t. The
default environment is denoted by FE_DFL_ENV (of type const fenv_t *).
This is the environment setup at program start and it is defined by ISO
C to have round to nearest, all exceptions cleared and a non-stop (con
tinue on exceptions) mode.
The fegetenv() function saves the current floating-point environment in
the object *envp.
The feholdexcept() function does the same, then clears all exception
flags, and sets a non-stop (continue on exceptions) mode, if available.
It returns zero when successful.
The fesetenv() function restores the floating-point environment from
the object *envp. This object must be known to be valid, for example,
the result of a call to fegetenv() or feholdexcept() or equal to
FE_DFL_ENV. This call does not raise exceptions.
The feupdateenv() function installs the floating-point environment rep
resented by the object *envp, except that currently raised exceptions
are not cleared. After calling this function, the raised exceptions
will be a bitwise OR of those previously set with those in *envp. As
before, the object *envp must be known to be valid.
These functions return zero on success and non-zero if an error
IEC 60559 (IEC 559:1989), ANSI/IEEE 854, C99.
If possible, the GNU C Library defines a macro FE_NOMASK_ENV which rep
resents an environment where every exception raised causes a trap to
occur. You can test for this macro using #ifdef. It is only defined
if _GNU_SOURCE is defined. The C99 standard does not define a way to
set individual bits in the floating-point mask, for example, to trap on
specific flags. glibc 2.2 supports the functions feenableexcept() and
fedisableexcept() to set individual floating-point traps, and fegetex
cept() to query the state.
int feenableexcept(int excepts);
int fedisableexcept(int excepts);
The feenableexcept() and fedisableexcept() functions enable (disable)
traps for each of the exceptions represented by excepts and return the
previous set of enabled exceptions when successful, and -1 otherwise.
The fegetexcept() function returns the set of all currently enabled
This page is part of release 3.05 of the Linux man-pages project. A
description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
Linux 2000-08-12 FENV(3)