Quick ?s
Cheat Sheets
Man Pages
The Lynx
Software
STTY(1) 			 User Commands			       STTY(1)



NAME
       stty - change and print terminal line settings

SYNOPSIS
       stty [-F DEVICE] [--file=DEVICE] [SETTING]...
       stty [-F DEVICE] [--file=DEVICE] [-a|--all]
       stty [-F DEVICE] [--file=DEVICE] [-g|--save]

DESCRIPTION
       Print or change terminal characteristics.

       -a, --all
	      print all current settings in human-readable form

       -g, --save
	      print all current settings in a stty-readable form

       -F, --file=DEVICE
	      open and use the specified DEVICE instead of stdin

       --help display this help and exit

       --version
	      output version information and exit

       Optional  -  before  SETTING  indicates negation.  An * marks non-POSIX
       settings.  The underlying system defines which settings are  available.

   Special characters:
       * dsusp CHAR
	      CHAR will send a terminal stop signal once input flushed

       eof CHAR
	      CHAR will send an end of file (terminate the input)

       eol CHAR
	      CHAR will end the line

       * eol2 CHAR
	      alternate CHAR for ending the line

       erase CHAR
	      CHAR will erase the last character typed

       intr CHAR
	      CHAR will send an interrupt signal

       kill CHAR
	      CHAR will erase the current line

       * lnext CHAR
	      CHAR will enter the next character quoted

       quit CHAR
	      CHAR will send a quit signal

       * rprnt CHAR
	      CHAR will redraw the current line

       start CHAR
	      CHAR will restart the output after stopping it

       stop CHAR
	      CHAR will stop the output

       susp CHAR
	      CHAR will send a terminal stop signal

       * swtch CHAR
	      CHAR will switch to a different shell layer

       * werase CHAR
	      CHAR will erase the last word typed

   Special settings:
       N      set the input and output speeds to N bauds

       * cols N
	      tell the kernel that the terminal has N columns

       * columns N
	      same as cols N

       ispeed N
	      set the input speed to N

       * line N
	      use line discipline N

       min N  with -icanon, set N characters minimum for a completed read

       ospeed N
	      set the output speed to N

       * rows N
	      tell the kernel that the terminal has N rows

       * size print the number of rows and columns according to the kernel

       speed  print the terminal speed

       time N with -icanon, set read timeout of N tenths of a second

   Control settings:
       [-]clocal
	      disable modem control signals

       [-]cread
	      allow input to be received

       * [-]crtscts
	      enable RTS/CTS handshaking

       csN    set character size to N bits, N in [5..8]

       [-]cstopb
	      use two stop bits per character (one with -)

       [-]hup send a hangup signal when the last process closes the tty

       [-]hupcl
	      same as [-]hup

       [-]parenb
	      generate parity bit in output and expect parity bit in input

       [-]parodd
	      set odd parity (even with -)

   Input settings:
       [-]brkint
	      breaks cause an interrupt signal

       [-]icrnl
	      translate carriage return to newline

       [-]ignbrk
	      ignore break characters

       [-]igncr
	      ignore carriage return

       [-]ignpar
	      ignore characters with parity errors

       * [-]imaxbel
	      beep and do not flush a full input buffer on a character

       [-]inlcr
	      translate newline to carriage return

       [-]inpck
	      enable input parity checking

       [-]istrip
	      clear high (8th) bit of input characters

       * [-]iutf8
	      assume input characters are UTF-8 encoded

       * [-]iuclc
	      translate uppercase characters to lowercase

       * [-]ixany
	      let any character restart output, not only start character

       [-]ixoff
	      enable sending of start/stop characters

       [-]ixon
	      enable XON/XOFF flow control

       [-]parmrk
	      mark parity errors (with a 255-0-character sequence)

       [-]tandem
	      same as [-]ixoff

   Output settings:
       * bsN  backspace delay style, N in [0..1]

       * crN  carriage return delay style, N in [0..3]

       * ffN  form feed delay style, N in [0..1]

       * nlN  newline delay style, N in [0..1]

       * [-]ocrnl
	      translate carriage return to newline

       * [-]ofdel
	      use delete characters for fill instead of null characters

       * [-]ofill
	      use fill (padding) characters instead of timing for delays

       * [-]olcuc
	      translate lowercase characters to uppercase

       * [-]onlcr
	      translate newline to carriage return-newline

       * [-]onlret
	      newline performs a carriage return

       * [-]onocr
	      do not print carriage returns in the first column

       [-]opost
	      postprocess output

       * tabN horizontal tab delay style, N in [0..3]

       * tabs same as tab0

       * -tabs
	      same as tab3

       * vtN  vertical tab delay style, N in [0..1]

   Local settings:
       [-]crterase
	      echo erase characters as backspace-space-backspace

       * crtkill
	      kill all line by obeying the echoprt and echoe settings

       * -crtkill
	      kill all line by obeying the echoctl and echok settings

       * [-]ctlecho
	      echo control characters in hat notation (^c)

       [-]echo
	      echo input characters

       * [-]echoctl
	      same as [-]ctlecho

       [-]echoe
	      same as [-]crterase

       [-]echok
	      echo a newline after a kill character

       * [-]echoke
	      same as [-]crtkill

       [-]echonl
	      echo newline even if not echoing other characters

       * [-]echoprt
	      echo erased characters backward, between \ and /

       [-]icanon
	      enable erase, kill, werase, and rprnt special characters

       [-]iexten
	      enable non-POSIX special characters

       [-]isig
	      enable interrupt, quit, and suspend special characters

       [-]noflsh
	      disable flushing after interrupt and quit special characters

       * [-]prterase
	      same as [-]echoprt

       * [-]tostop
	      stop background jobs that try to write to the terminal

       * [-]xcase
	      with icanon, escape with \ for uppercase characters

   Combination settings:
       * [-]LCASE
	      same as [-]lcase

       cbreak same as -icanon

       -cbreak
	      same as icanon

       cooked same  as	brkint ignpar istrip icrnl ixon opost isig icanon, eof
	      and eol characters to their default values

       -cooked
	      same as raw

       crt    same as echoe echoctl echoke

       dec    same as echoe echoctl echoke -ixany intr ^c erase 0177 kill ^u

       * [-]decctlq
	      same as [-]ixany

       ek     erase and kill characters to their default values

       evenp  same as parenb -parodd cs7

       -evenp same as -parenb cs8

       * [-]lcase
	      same as xcase iuclc olcuc

       litout same as -parenb -istrip -opost cs8

       -litout
	      same as parenb istrip opost cs7

       nl     same as -icrnl -onlcr

       -nl    same as icrnl -inlcr -igncr onlcr -ocrnl -onlret

       oddp   same as parenb parodd cs7

       -oddp  same as -parenb cs8

       [-]parity
	      same as [-]evenp

       pass8  same as -parenb -istrip cs8

       -pass8 same as parenb istrip cs7

       raw    same as -ignbrk -brkint -ignpar -parmrk  -inpck  -istrip	-inlcr
	      -igncr  -icrnl   -ixon   -ixoff	-iuclc	-ixany -imaxbel -opost
	      -isig -icanon -xcase min 1 time 0

       -raw   same as cooked

       sane   same as cread -ignbrk brkint -inlcr -igncr icrnl	-iutf8	-ixoff
	      -iuclc  -ixany  imaxbel opost -olcuc -ocrnl onlcr -onocr -onlret
	      -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon  iexten  echo
	      echoe  echok  -echonl  -noflsh  -xcase  -tostop -echoprt echoctl
	      echoke, all special characters to their default values.

       Handle the tty line connected to standard  input.   Without  arguments,
       prints  baud  rate, line discipline, and deviations from stty sane.  In
       settings, CHAR is taken literally, or coded as in  ^c,  0x37,  0177  or
       127; special values ^- or undef used to disable special characters.

AUTHOR
       Written by David MacKenzie.

REPORTING BUGS
       Report bugs to .

COPYRIGHT
       Copyright  2006 Free Software Foundation, Inc.
       This  is  free  software.   You may redistribute copies of it under the
       terms	  of	  the	   GNU	    General	  Public       License
       .	 There	is NO WARRANTY, to the
       extent permitted by law.

SEE ALSO
       The full documentation for stty is maintained as a Texinfo manual.   If
       the  info  and  stty  programs are properly installed at your site, the
       command

	      info stty

       should give you access to the complete manual.



stty 5.97			 January 2007			       STTY(1)




Yals.net is © 1999-2009 Crescendo Communications
Sharing tech info on the web for more than a decade!
This page was generated Thu Apr 30 17:05:22 2009