PERLTRU64(1) Perl Programmers Reference Guide PERLTRU64(1)
README.tru64 - Perl version 5 on Tru64 (formerly known as Digital UNIX
formerly known as DEC OSF/1) systems
This document describes various features of HPs (formerly Compaqs,
formerly Digitals) Unix operating system (Tru64) that will affect how
Perl version 5 (hereafter just Perl) is configured, compiled and/or
Compiling Perl 5 on Tru64
The recommended compiler to use in Tru64 is the native C compiler. The
native compiler produces much faster code (the speed difference is
noticeable: several dozen percentages) and also more correct code: if
you are considering using the GNU C compiler you should use at the very
least the release of 2.95.3 since all older gcc releases are known to
produce broken code when compiling Perl. One manifestation of this
brokenness is the lib/sdbm test dumping core; another is many of the
op/regexp and op/pat, or ext/Storable tests dumping core (the exact
pattern of failures depending on the GCC release and optimization
gcc 3.2.1 is known to work okay with Perl 5.8.0. However, when opti
mizing the toke.c gcc likes to have a lot of memory, 256 megabytes
seems to be enough. The default setting of the process data section in
Tru64 should be one gigabyte, but some sites/setups might have lowered
that. The configuration process of Perl checks for too low process
limits, and lowers the optimization for the toke.c if necessary, and
also gives advice on how to raise the process limits.
Using Large Files with Perl on Tru64
In Tru64 Perl is automatically able to use large files, that is, files
larger than 2 gigabytes, there is no need to use the Configure -Duse
largefiles option as described in INSTALL (though using the option is
Threaded Perl on Tru64
If you want to use threads, you should primarily use the new Perl 5.8.0
threads model by running Configure with -Duseithreads.
The old Perl 5.005 threads is obsolete, unmaintained, and its use is
discouraged. If you really want it, run Configure with the
-Dusethreads -Duse5005threads options as described in INSTALL.
Either thread model is going to work only in Tru64 4.0 and newer
releases, older operating releases like 3.2 arent probably going to
work properly with threads.
In Tru64 V5 (at least V5.1A, V5.1B) you cannot build threaded Perl with
gcc because the system header explicitly checks for sup
ported C compilers, gcc (at least 3.2.2) not being one of them. But
the system C compiler should work just fine.
Long Doubles on Tru64
You cannot Configure Perl to use long doubles unless you have at least
Tru64 V5.0, the long double support simply wasnt functional enough
before that. Perls Configure will override attempts to use the long
doubles (you can notice this by Configure finding out that the modfl()
function does not work as it should).
At the time of this writing (June 2002), there is a known bug in the
Tru64 libc printing of long doubles when not using "e" notation. The
values are correct and usable, but you only get a limited number of
digits displayed unless you force the issue by using "printf
"%.33e",$num" or the like. For Tru64 versions V5.0A through V5.1A, a
patch is expected sometime after perl 5.8.0 is released. If your libc
has not yet been patched, youll get a warning from Configure when
selecting long doubles.
DB_File tests failing on Tru64
The DB_File tests (db-btree.t, db-hash.t, db-recno.t) may fail you have
installed a newer version of Berkeley DB into the system and the -I and
-L compiler and linker flags introduce version conflicts with the DB
1.85 headers and libraries that came with the Tru64. For example, mix
ing a DB v2 library with the DB v1 headers is a bad idea. Watch out
for Configure options -Dlocincpth and -Dloclibpth, and check your
/usr/local/include and /usr/local/lib since they are included by
The second option is to explicitly instruct Configure to detect the
newer Berkeley DB installation, by supplying the right directories with
"-Dlocincpth=/some/include" and "-Dloclibpth=/some/lib" and before run
ning "make test" setting your LD_LIBRARY_PATH to /some/lib.
The third option is to work around the problem by disabling the DB_File
completely when build Perl by specifying -Ui_db to Configure, and then
using the BerkeleyDB module from CPAN instead of DB_File. The Berke
leyDB works with Berkeley DB versions 2.* or greater.
The Berkeley DB 4.1.25 has been tested with Tru64 V5.1A and found to
work. The latest Berkeley DB can be found from http://www.sleepy
64-bit Perl on Tru64
In Tru64 Perls integers are automatically 64-bit wide, there is no
need to use the Configure -Duse64bitint option as described in INSTALL.
Similarly, there is no need for -Duse64bitall since pointers are auto
matically 64-bit wide.
Warnings about floating-point overflow when compiling Perl on Tru64
When compiling Perl in Tru64 you may (depending on the compiler
release) see two warnings like this
cc: Warning: numeric.c, line 104: In this statement, floating-point overflow occurs in evaluating the expression "1.8e308". (floatoverfl)
and when compiling the POSIX extension
cc: Warning: const-c.inc, line 2007: In this statement, floating-point overflow occurs in evaluating the expression "1.8e308". (floatoverfl)
The exact line numbers may vary between Perl releases. The warnings
are benign and can be ignored: in later C compiler releases the warn
ings should be gone.
When the file pp_sys.c is being compiled you may (depending on the
operating system release) see an additional compiler flag being used:
"-DNO_EFF_ONLY_OK". This is normal and refers to a feature that is
relevant only if you use the "filetest" pragma. In older releases of
the operating system the feature was broken and the NO_EFF_ONLY_OK
instructs Perl not to use the feature.
Testing Perl on Tru64
During "make test" the "comp/cpp" will be skipped because on Tru64 it
cannot be tested before Perl has been installed. The test refers to
the use of the "-P" option of Perl.
ext/ODBM_File/odbm Test Failing With Static Builds
The ext/ODBM_File/odbm is known to fail with static builds (Configure
-Uusedl) due to a known bug in Tru64s static libdbm library. The good
news is that you very probably dont need to ever use the ODBM_File
extension since more advanced NDBM_File works fine, not to mention the
even more advanced DB_File.
Perl Fails Because Of Unresolved Symbol sockatmark
If you get an error like
Cant load .../OSF1/lib/perl5/5.8.0/alpha-dec_osf/auto/IO/IO.so for module IO: Unresolved symbol in .../lib/perl5/5.8.0/alpha-dec_osf/auto/IO/IO.so: sockatmark at .../lib/perl5/5.8.0/alpha-dec_osf/XSLoader.pm line 75.
you need to either recompile your Perl in Tru64 4.0D or upgrade your
Tru64 4.0D to at least 4.0F: the sockatmark() system call was added in
Tru64 4.0F, and the IO extension refers that symbol.
perl v5.8.8 2008-04-25 PERLTRU64(1)